Back to Index Page
Item Description
Print this Item

DRAWWORKS:

IDECO Model Hydrair H-1000, Single Drum with Back-in Rambler,
Rig Carrier # BIR-8005 – 6 Axle (3 Front, 3 Rear), 1,000 HP    
Depth Rating – 12,000 ft w/ 3-1/2” Drill Pipe – Workover 25,000 ft
2-3/8” Tubing, 1-18” Drill Line, Mechanical Drive from Carriers Front
Mounted Two GM Engines 12V71T, through 2 Allison Torqmatic
Transmissions 5680, Auxiliary Brake 22” Double Hydromatic Type “B”

POWER UNITS:

Two G M (Detroit Diesel) Engines Model 12V71 Diesel Engines,
434 HP at 2100 RPM, Transmissions – Two Allison Torqmatic,
Mod. CLBT 5680 with Two Allison TC-580 Torque Converters
w/ Hydraulic Retarders Providing 5 Speeds forward and 1 Reverse.
Transmission Rebuilt January, 2007

CARRIER:

Rambler Rig BIR 8005, Axles & Suspension: Steerrable  Schuler
65,000 lb Capacity Triple Steel Front Axles and Spring Suspension
System.  Six (6) 18 – 22.5 x 16 Ply Nylon Front tires with Budd
Wheels.  Clark 60,000 lb Capacity.  Planetary Tandem Steel Rear
Axles w/ Hendrickson Suspension System and Single Tag Axle,
One-Man type Cab, Mounted Offset, with Safety Glass, Bus Type
Driver’s Seat and controls

MAST:

IDECO KM-112- 358, AH Kwik – Lift Telescoping Mast, 112 ft
Clear Height from Ground to Underside of Crown, Static Hook
Load with 10 Lines String-Up 358,000 lb, (343,000 lb with 8 lines)

CROWN:

IDECO Crossover Type with Timken Double Tapered Roller
Bearings, Grooved Sheaves 5 – 36, 1 – 42 Fabriform 1-1/8”
For 6, 8, or 10 Line String-Up, Traveling Block, Crown Safety
Platform w/ Hand Rails, Less Toe Boards

RACKING PLATFORM:

Description Fixed Elevation at 71 ft to work with 16 ft.
Substructure Transverse Racking Rakes Having a Capacity
Of 156 Stands in 60 ft lengths of 4-1/2” Drill Pipe or 296 Stands
Of 60 ft Lengths of 2-7/8” Tubing.  Ten Stabilizer Lines & Guy-
Lines To be Dead Ended at Substructure, Carrier & 90’ Forward-
Front Rear & 90’ to Rear & 90’ to Each Side of Carline of Well

SUBSTRUCTURE:

IDECO 260 Ton Telescoping 13’-6” and when Mounted on a
2’-6” Sub-base provides 16’ Height (9’-6” for Transport),
320,000 lbs Setback Capacity, 19’-4” Wide and 16’-4” long
With Walkways Extended 11’-6” Wide and 18” Long With
Walkways Folded, Hydraulic Elevating Dog House Base, (Dog-
House Self elevating Hydraulic Base available but No Doghouse
On it now.  New Doghouse Required – Not Included)

TRAVLING BLOCK:

IDECO UTB – 160-4-36, Shorty Unitized, 160 Tons, 4-36”
Grooved Sheaves for 1-1/8” Line

SWIVEL:

IDECO Model TL-200, 200 Ton Capacity, Connections 6-5/8”
API reg. LH, Completely Rebuilt by Rig Master 1-15-2007

ROTARY TABLE:

IDECO LR-275-K, Size – 27-1/2”, 355 Ton Rotating Load
570 Tons Hold Down Dead Load

TONGS:

ECKEL 13-5/8” Power Hydraulic Tong, w/ 5 Sets Jaws,
Manual Tongs Style D and DB with Several Sets of Jaws

MASTER BUSHING:

VARCO MSPC, Split Square 13-9/16”

KELLY:

1 Each Omsco 4-1/4” Hex Kelly

KELLY BUSHING:

One VARCO 4KRBM Roller, 27.5” Size 4-1/4” Hexagonal

KELLY VALVES:

Two (2) Upper and Lower, Omsco, 5000 PSI,
6-5/8” Connections – API Reg. LH

KELLY SPINNER:

VARCO # 6502-01, with Air Motor for Left & Right Rotation,
Kelly Saver Sub 2-7/8” IF Box x 3-1/2” Pin, 4-3/4” Length

LIGHTING SYSTEM:

Rig-A-Lite Heavy Duty Vapor Tight Fluorescent and Mercury
Vapor Lighting System, Water Proof Fluorescent Lights, Heavy
Duty, Sufficient to Light up the Mast, Floor, Mud Tanks, Doghouse,
Engines, BOP’s, etc. – UL Listed for Hazardous Locatiions

INSTRUMENTATION:

Weight Indicator – FS Type 400,000 lbs, Torque Indicator System
FA 9-21, Gauges, Accessories and Controls, 5 Pen Drilling
Recorder – NEW, Wagner Int’l, Totco Drift Indicator (International)

SUPERCHARGER AND MUD MIXING PUMPS:

Two (2) Supercharging Pumps, Mission Type, 5 x 6 “w” Cast Iron
Centrifugal Pumps powered by 40 HP 1200 RPM Explosion Proof
Motor, 3ph / 230 / 460 volt / 60 cycle, New Starters, Wiring, etc.,

2 Mud Mixing on Master Skid, Mod. 6 x 8 “w” Cast Iron Centrifugal
Pumps, Powered by 60 HP 1200 RPM Explosion Proof Motor,
3 ph / 230 / 460 volt / 60 cycle w/ New Starters, Wiring, rewound Motor

MUD PUMP:

One Type Triplex 7-3/4” x 14”, Mod. IDECO T1000 Caterpillar
950 HP – D398T Diesel Engine

MUD SYSTEM SHAKER TANK – 318 bbl

One 10’-0” Wide x 8’- 0” Deep x 30’-0” Long Tank, 318 bbl,
Agitators: 1, Brand Mod. MA 7 Yz Completely Rebuilt with a new
XP, 7.5 HP Motor, Mud Guns – 3 – 3” L.P. Bottom Mud Guns 

MUD SYSTEM SUCTION TANK - 318 bbl

One 10’-0” Wide x 8’-0” Deep x 30’-0” Long Tank, 318 bbl,
Agitators: 2, Brand Mod. MA 7 Y2 Yz Completely Rebuilt  with New
XP 7.5 HP Motor, Mud Guns – 4 – 3” L.P. Bottom Mud Guns,
And 1 – 2” Top Mounted Mud Guns (repaired), Pill Tanks: 2 – 70 bbl
Pill Compartment in Suction Tank

MUD SYSTEM ACCESSORIES:

Harrisonburg (National Oilwell) Linear Motion Shaker with 2 Invicta
Motors – New Wiring & Starter, Brant Single Tandem (dual screen)
Shaker w/ New XP Motor, Starter and Wiring, Brant Single Screen
Shaker w/ 10 Cone Distiller, New XP Motor, Starter & Wiring, Brant
2 Cone Desander, Drillco Degasser with New XP Motor and Starter,
Brandt Agitators (3 ea) – See above under Mud Tanks

GENERATOR AND COMPRESSOR HOUSE:

2 ea – Two Mustang / Caterpillar Mod. 3408 PCT A. 60Hz,
1800 RPM, 3 Ph, 240 / 480 volt. 300 KW Standby, 265 KW Prime, Generators Rewound, Refurbished Generator Ends, as Follows:

Control Panel, Generator Mounted, Engine Equipment 24 volt
Electric (oil pressure, water temp., Shutoffs) Contacts for remote
Alarms Wired to Terminal Strip, Radiator, Fan Blower, & Fan Drive
Generator w/ Voltage Regulator, Governor, Generator Control
Panel, Switch Gear, Switchboard, Motor Control Center, Motor
Starter, Heater, Power Transformer, Fuses and Start / Stop
Push Button and RUN indicator lights

BOP STACK:

Two (2) Hydril Ram BOP’s, Flanged x Studded, Dressed for Blind
And Tubing or Casing 13-5/8” 5000 psi, 1 – Hydril GK Annular BOP
Flanged x Studded 13-5/8” x 5000 psi, 5 ea Sets of Rams for Tubing
And Casing with Carriers.  For 7”, 4-1/2”, 3-1/2”, 2-7/8” and 2-3/8”
& Blind Rams

TOOLS & MISC. EQUIPMENT:

Rig has Handling Tools for 4-1/2” Drill Pipe, 6”, 7” and Drill Collars,
Casing from 4-1/2” to 13-5/8” and for Tubing from 2-3/8” to 3-1/2”.
Also an Extensive List of Cross Overs, Hole Stabilizers, Fishing
Tools

TUBULARS:

13 Joints $-1/2” XL Heavy Weight Drill Pipe,
20 Drill Collars, 6” Spiral Nominal
10 Drill Collars 6-3/4” Spiral Nominal
 3 Drill Collars 7” Spiral Nominal
1 Drill Collar 7-1/2” Spiral

JUNK BASKET:

2 Each Junk / Tool Baskets Approx 40 ft Long x 8 ft Wide x 4 ft High,
Very Good Condition. 
3 Each Hose / Cable Suitcases, Without Hoses or Cables
New Grating Installed