MAST
Skytop Brewster 142’ x 1,000,000# SHL Capacity, 25’ Leg
Spread. Serial #78-111. Racking Board with A Full Setback
Of 255 Stands of 4-1/2” Drill Pipe. Crown Block 7 x 60”
Twelve Line Capability. Mast Weight Is 116,095#.
SUB BASE
Ideco 21’ High Step-down Box on Box. Modified To Meet API
4F-RP4G Category 4 Specs. Rated to 1,000,000# And A Setback
Capacity of 700,000#. Serial #78-1111
DRAW- WORKS
Gardner-Denver 1100M Single Drum Drawworks. Rated To
1500 HP, With 1-3/8” Lebus Grooved Drum, Serial #DW1162-1.
Three Engine Sectional Compound, Driven By Three (3) 3412
Cat Engines. Each Rated @ 725HP/2000RPM. Drawworks
Equipped With Parkersburg V-200 Hydro-Matic Auxiliary
Brake. Kelco Make-up and Break-out Catheads.
BLOCK/ HOOK
Ideco UTB 525 Six (6) 1-3/8” Sheaves. 525 Ton Block/Hook
Combination. Serial # 94.
ROTARY TABLE
Gardner-Denver 27-1/2” x 53” Rotary Table. Serial #328.
Chain Driven From Drawworks.
SWIVEL
Continental-Emsco LB-500 Swivel. Serial #58.
With Spare Quick-Change Packing.
PUMPS
Two (2) 3NB1300 (Chinese) Tri-plex Pumps, 1300 HP. Both
Pumps Have The Same Serial #20060115. Both Pumps Equiped
With Pulsation Dampeners And Pop-Off Valves. Pump #1 Is
Charged By A 6” x 8” Centrifugal Pump Powered By A 40HP
Electric Motor. Pump #2 Is Charged By A 50HP Electric Motor.
Both Pumps Are Each Belt Driven By A D-399 Catipillar Engine,
Rated @ 1,225HP.
MUD PITS
Three (3) Pits, 1,500 Barrel Capacity. Within The Pits There Are
Sand Traps, Settling Pit, And Two 60 Barrel Spot/Slugging Tanks.
Pits Also Equiped With Eleven (11) Derrick 10HP, KF87AM215
Horizontal Mud Agitators. Two (2) 6” x 8” Centrifugal Mixing
Pumps, Both Diven By 75HP Electric Motors. Three (3)
6” x 8” Centrifugal Desander/Desilter/Degasser Pumps, All
Driven By 75HP Electric Motors. Pits Also Have Covers.
SHAKER
One (1) Derrick Dual FLC-503/High ‘G’ Shaker
Serial # MAH008442. Two (2) 25HP Motors.
Derrick Model #SGX-34-18-460/480 6-001. 1800RPM.
Serial #SG-5816
#SG-5817
#SG-5818
#SG-5819
MUD CLEANER
One (1) Derrick FLC-503/High ‘G’ (2-16) Desander/Desilter/
Mud Cleaner. Serial #MAH008914. Two (2) 25HP Motors,
Derrick Model #SGX-34-18-460/480 6-001. 1800RPM.
Serial #SG-5955
#SG-5956
Two (2) 10” Desanding Cones (1200gpm). Sixteen (16) 4”
Desilting Cones (1280gpm)
Desander Serial #AD002570.
Desilter Serial #AD002477.
DE-GASER
One (1) Derrick VACU-FLO 1200 Degasser
Serial #DG000375.
T.P. HOUSE
One (1) 10’W x 10’H x 56’L Combination Office/Living Quarters
For Toolpushers.
DOG HOUSE
Top House With Lockers And Knowledge Box. BOP Remote Sta.
BOTTOM HOUSE
Tool/Change House Combination. 8’W x 9’H x 38’ Long. Lockers
And Storage Shelves For Rig Supplies.
DIESEL TANK
One (1) 10’W x 7’H x 34’L w/Two (2) 1.25” x .75” Transfer
Pumps. Tank Volumn Is 17,800 Gallons. 212 Gals./In.
WATER TANK
One (1) 7’8”W x 6’H x 30’L Tank w/Three (3) 5” x 6” Centri-
Fugal Transfer Pumps. Each Powered By A 30HP Electric
Motor. Tank Volunm Is 500 Barrels.
GEN. HOUSE
One (1) 10’W x 9’H x 50’L Generator House. Housing Two
Catapillar SR4 500KW Generator Sets. Two (2) Curtis Model
RS 40 Air Compressors, Rated At 150CFM At 150PSI. Breaker
Panels And Switch Gear.
RIG BASKET
One (1) 8’W x 3’H x 34’L Rig Basket For Hauling Handling Tools.
Rotary Bushings, Tongs, Etc.
BOP CONTROL UNIT
C.P.C. Six (6) Station BOP Contol Unit w/Rig Floor Remote.
Serial #6270. Powered By A Consolidated Pressure Control
Model CPC BP-4032 Triplex Pump, Serial #00695, Powered By
An Emerson 20HP Electric Motor, ID#J07-A625-H, Cat.#1C20E8.
Plus Two (2) Air Driven Pumps. (No ID Tags On Air Pumps). Unit
Has A 150 Gallon Capacity.
SLICK LINE UNIT
Five Star Model 092X20000 Surveyor. Serial #2-12-06.
Unit Has 20,000’ Of .092 Slick Line.
HYD. UNIT
One (1) Nova HPU-S40 Hydralic Power Unit, (Furnished By
Lamb Services, Inc.). Powered By A WEG Model 04018XP3
E32UTC 40HP Electric Motor, Serial #AG-794877, Driving A
Type K3VL807A-10RKS-PO/1-L2 Hydralic Pump, Serial
#00028275. Unit Serial #DU0503004. Unit Is Used to Operate
Kelly Spinner And Pipe Spinner.
KELLY SPINNER
Foster Hydralic Kelly Spinner. Serial #77 L 101.
PIPE SPINNER
Spinmaster Model 950, Serial #SPARE 3408. (Furnished By
Lamb Services, Inc.).
GENERATORS
#1 Caterpillar 3412 Serial #81204255, SR4 500KW Generator
Serial #SNA04870.
#2 Caterpillar 3412 Serial #38S3510, SR4 500KW Generator
Serial #58BH4388T.
PUMP ENGINES
#1 Caterpillar D-399, Serial #35B03762.
#2 Caterpillar D-399, Serial #35B04734.
COMPOUND ENGINES
#1 Caterpillar 3412C. Serial #8AR03412. Torque Converter
Oilworks Model #195-100, Serial #1486.
#2 Caterpillar 3412C. Serial #8AR03414. Torque Converter
Oilworks Model #195-100, Serial #1483.
#3 Caterpillar 3412C, Serial #8AR03413. Torque Converter
Oilworks Model #195-100, Serial #1476.
MUD AGITATERS
Eleven (11) Derrick Model #KF87AM215
Serial #s
#1 890120618.06.06.020
#2 890120585.06.06.007
#3 890120585.06.06.005
#4 890120579.06.06.011
#5 890120579.06.06.009
#6 890120622.06.06.001
#7 890120622.06.06.007
#8 890120585.06.06.010
#9 890120622.06.06.010
#10 890120579.06.06.017
#11 890120618.06.06.077
MUD AGITATER MOTORS
Eleven (11) Baldor #BV375232, Cat. #60C RISE, 10HP Electric
Motors. 60Hz, 230/240V, 215TC Frame.
Serial #s
#1 F0602076401
#2 F0601290496
#3 F0602076441
#4 F0602216133
#5 F0601290711
#6 F0601290681
#7 F0602076346
#8 F0601290581
#9 F0601290766
#10 F0602216148
#11 F0602076381
NOTE: AGITATERS FURNISHED BY DERRICK EQUIPMENT CO.
BUT MANUFACTURED BY SEW EURODRIVE, INC.
AIR HOIST
Two (2) Ingersoll Rand Air Hoist.
#1 Ingersoll Rand Model #FA5A-24MX1G
Serial #MW004968. Rated To 10K.
#2 Ingersoll Rand Model #HUL-40
Serial #AA910953CM. Rated To 4K.
CHARGING PUMPS
#1 MCM 6” x 8” Series 250, RH, With A 9.5” Impeller,
Centrifugal Pump. Serial #11769.
Powered By A Baldor #BV974489, Cat. # M7062T-1, 40HP
324T Frame, 230/460V, 1775RPM Electric Motor.
Serial #C0603080044.
#2 MCM 6” x 8” Series 250, RH, With A 9.5” Impeller,
Centrifugal Pump. Serial #11231.
Powered By A Baldor #1BV887301, Cat. #M7064T-1, 50HP
326T Frame, 230/460V, 1775RPM Electric Motor.
Serial #C0601240153.
MIXING PUMPS
#1 MCM 6” x 8” Series 250, RH, With A 10.5” Impeller,
Centrifugal Pump. Serial #11193.
Powered By A Baldor #BV790473, Cat.#M7068T-1, 75HP,
365T Frame, 230/460V, 1780RPM Electric Motor.
Serial #C0601230194.
#2 MCM 6” x 8” Series 250, RH, With A 10.5” Impeller,
Centrifugal Pump. Serial #11192.
Powered By A Baldor #BV887364, Cat. #70668T-1, 75HP,
365T Frame, 230/460V, 1780RPM Electric Motor.
Serial #C0601270204.
DESANDER/DESILTER/DEGASSER PUMPS
#1 MCM 6” x 8” Series 250, RH, With A 10.37” Impeller,
Centrifugal Pump. Serial #14116. Note: Original Pump Was
Serial #11195. It Was Sent To Crown Yard, 2/27/07.
Powered By A Baldor #BV790476, Cat. #M7068T-1, 75HP,
365T Frame, 230/460V, 1780RPM Electric Motor.
Serial #C0601230179.
#2 MCM 6” x 8” Series 250, RH, With A 10.37” Impeller,
Centrifugal Pump. Serial #11202.
Powered By A Baldor #BV790179, Cat. #M7068T-1, 75HP,
365T Frame, 230/460V, 1780RPM Electric Motor.
Serial #C0601100179.
#3 MCM 6” x 8” Series 250, RH, With A 10.37” Impeller,
Centrifugal Pump. Serial #11196.
Powered By A Baldor #1BV887363, Cat. #M7068T-1, 75HP,
365T Frame, 230/460V, 1780RPM Electric Motor.
Serial #C0601270199.
AIR COMPRESSORS
Two (2) Curtis Model RS-40 A/E E-12+ Air Compressors,
Rated At 150CFM At 150PSI.
Serial #s #1 7683F06001
#2 7683F06001
Both Are Driven By Baldor Cat. #M2538T, 40HP, 286TS Frame
Electric Motors. Serial #s #1 Z0603140176
#2 Z0603140171
TUBULARS
473 Joints 5” S-135 19.5# Drill Pipe W/4-1/2”IF Connections
22 Joints 5” Spiral Wieght Drill Pipe W/4-1/2”IF Connections
11 Joints 6-1/2” Drill Collars W/4-1/2”XH Connections.
3 Joints 8” Drill Collars W/6-5/8”REG Connections.
1 5-1/4” Hex Kelly W/ 4-1/2”XH Pin.
SUBS
1ea. Double Pin X-Over Sub For Top Of Kelly
7-5/8”REG LH x 6-5/8”REG LH. Serial #55755-1.
2ea. Upper Kelly Valves. 6-5/8”REG LH Box x Pin.10M.
Serial #s DM-4866.
DM-4867.
2ea. Lower Kelly Valves. 4-1/2”IF Connections. 10M
Serial #s DM-4868.
DM-4869.
2ea. Inside BOP Valves. 4-1/2”IF Connections. 10M
Serial #s GM-19348.
GM-20014.
8ea. Lift Subs, 4-1/2”XH W/5” Shanks.
3ea. Lift Subs. 6-5/8”REG. W/5” Shanks.
6ea. 6-1/2”OD Burn Subs, 4-1/2”IF Pin x Box Connections.
2-13/16”ID. Serial #s 55611-1 thru 55611-6.
2ea. 6-1/2”OD Bit Subs, 4-1/2”XH Box x 4-1/2”REG Box (BFF). Serial #s 55611-7 & 55611-8.
2ea. 8”OD Bit Subs, 4-1/2”XH Box x 6-5/8”REG Box (BFF)
6-1/2” Bottle Neck. Serial #s 55611-9 & 55611-10.
2ea. 8”OD Bit Subs, 6-5/8”REG Box x 6-5/8”REG Box (BFF)
Serial #s 55611-11 & 55611-12.
2ea. 6-1/2” Kelly Extension Subs, 4-1/2”IF Connections.
2-13/16”ID. Serial #s 55611-13 & 55611-14.
6ea. 6-1/2”OD Crossover Subs, 4-1/2”IF Box x 4-1/2”XH Pin.
2-13/16”ID. Serial #s 55611-15 thru 55611-20.
1ea. 8”OD x 6-1/2” Bottleneck Crossover Sub, 4-1/2”XH Box
X 6-5/8”REG Pin. Serial # FHC-1030.
1ea. 4-1/2”IF Pin x 2” 1502 Pump-in Sub.
MISC.
2ea. Master Bushings For Gardner-Denver 27-1/2” Rotary.
One Pin Drive and One Combination Pin/Sq. Drive.
2ea. Kelly Drive Bushings. Pin Drive.
2ea. Type DB Drill Pipe Tongs.
2ea. Type HT-100 Drill Pipe Tongs.
2ea. Varco SDXL 5” Drill Pipe Slips.
2ea. Varco Drill Collar Slips.
1ea. Oteco Mud Bucket.
2ea. Web Wilson 5” 18º Taper Drill Pipe Elevators.
2ea. Type ‘C’, 3-1/2”-10-3/4” Safety Clamps.
CHOKE MANIFOLD
4-1/16” 10M x 3-1/16” 10M Choke Manifold. Manifold
Was Re-Built By Doyles Valves, Corpus Christi, Tx.
Contact Us With Questions……….1-800-304-9041 |