DRAWWORKS:
EMSCO A550-E – Diesel-Electric with Input Rating of 800 HP,
Parmac Hydro-Matic, Crown-O-Matic and EMSCO Catheads,
Drum is LEBUS Grooved for 1-1/8” Drilling Line
PRIMARY POWER:
Three (3) Cat 379 Engines Rated at 550 HP Each, Driving DC
Generators, w/ GE Control System
MAST:
Ja-Co 136’ x 13.6’ Base at Floor. API Static Hook Load at
500,000 Lbs. with 10 Lines Strung
SUBSTRUCTURE:
Ja-Co One Piece Sub with a 16.6’ Floor Height and 14.6’
Clear Height Under the Rotary Beam. Substructure is Designed
For a 450,000 Lbs. Casing Load Simultaneous with a
Setback Load of 400,000 Lbs
MUD PUMPS:
Two (2) EMSCO F-800 TRIPLEX, Rated at 800 HP Each.
Each Pump is Driven by One 800 HP – GE 752 Traction
Motor. Each with 5 x 6 x 11 Centrifugal Charge Pump
MUD TANKS:
Shaker Pit with (2) SWACO Model LS Linear Shakers, One
3-HP US Electric 10 HP Driven Falk Brand Agitator. Suction
Pit With 2-Elect. Agitators, 1- TECO 5 HP Electric, 1 – TOSHIBA
Elect. 10 HP Motor with Falk Brand Agitator
PRE-MIX TANK:
400 BBL w/ 2-Elect. Agitators, 1- Baldor 3/5 HP Motor,
2- Centrifugals, 1- Reliance 50 HP Motor Hooked Up To A
5 x 6 x 11 Centrifugal, 1- WEG Elect 60 HP Motor Hooked
Up To a MCM 5 x 6 x 12 Centrifugal Pump. Total Volume of
All 3 Pits is Approx. 800 BBL
MUD CLEANER:
MCM/O-Drill MCS-800 with 10 DeSilter Cones Mounted
Over Orbital Motion Shaker, Hooked Up To a MCM 5 x 6 x 14
Centrifugal Pump. 2- Hooper Centrifugals, 1- 75 HP Elect.
Motor, Hooked Up To a Double Life 250 – 6 x 5 x 11
Centrifugal, 1- 75 HP Elect. Motor Hooked up to a Mission
Magnum l 6 x 5 x 14 Centrifugal
BOP:
11” 5000 PSI HyDrill Double Ram Type Prevented with (2)
4” Fluid Ports Below the Bottom Rams. Shafer Type Spherical
Preventer (2) 3” Camron 5000 PSI Gate Valves. (2) 2”
Cameron 5000 PSI Gate Valves. (1) 2” 5000 PSI Kill Line
Check Valve. 5M Choke Manifold with Steel Line From
BOP’s to Gas Manifold
ACCUMULATOR:
4 Station, 120 Gallon (New) OCG Pressure Controls Brand
With 1- Triplex Pump Powered by Elect. 15 HP Motor with a
Dual Air Back up System. 8 Nitrogen Bottles
KELLY:
New 5-1/4” x 44’ HEX
FUEL STORAGES:
Capacity of 9,200 Gallons
FRESH WATER TANK:
Capacity of 400 BBL
BLOCK/HOOK:
Continental EMSCO, 10 Line, 350 Ton w/ a WEB Wilson
350 Ton Hook
ROTARY TABLE:
20-1/2” EMSCO With Split Master Bushing
SWIVEL:
SL-225, 225 Ton (new)
AC GENERATOR:
2- 3406 Cat Light Plants with 400 KW Generators
BOILER:
YORK SHIPLEY, Model PSEV-125-2FAE-73800-D with
Power Flame Burner Control Model C4-0A, Assorted
Heaters
DRILL COLLARS:
18 JTS – 6-1/4” (New) with XH Connection Drill Collars
& 4 – 8” Collars with Related Handling Equipment
DRILL PIPE:
319 JTS (New) 4-1/2” G-105 w/ 4-1/2”if CONN, All Related
Handling Equipment
Contact Us With Questions……….1-800-304-9041 |
