#470W6– BRAND NEW 2009 WORKOVER / WELL SERVICE / DRILLING RIG

RIG SPECIFICATIONS:

1. Six (6) Axle Back-In Carrier
2. Two (2) Detroit Diesel Series 60 – 450 HP Engines, Equipped with High Ambient Temperature Radiators, Alternators, Starters, Air
   Compressors, Power Steering Pump, Emergency Shut Downs, All
   Gauges and Filters, 12 Volt Electrical System
3. Two (2) Allison 5860, Six (6) Speed Automatic Transmission with Torque Convertors and Filtration System
4. Full Fabricated Chassis Rails with Bumpers and Tow Hooks
5. Three (3) 20,000# Steering Axles with Hendrickson Suspension and DOT Air brakes
6. Three (3) 23,000# Rear Driving Axles with Hendrickson Suspension and Interaxle Locks.  Emergency and Parking Brake System
7. Single Man Cab with Adjustable Seat Belt and Instrumentation
8. Rig Decked with 3/16” Textured Decking, Equipped with Four (4) Hydraulic Leveling Jacks, Walk-ways are Static Free Fibergrate,
   Tool Boxes and Junk Boxes to Customer Preference
9. Two (2) 12,000# Hydraulic Winches  

750 HORSEPOWER HOPPER  FWA DRAWORKS:

1. Main Drum.
         46” x 12” Brake Flanges
         Brake Area 3120 Sq. In.
         Barrel Diameter  22-3/8”
         Barrel Length  42”
         Drum Capacity  1-1/8 Line  3,620’
         Drum Clutch  32 VC-1000 Fawick Outboard
         Input Chain 1-1/4 Quad
         Drum To Drum Chain  1-3/4”
         Hydromatic Chain  1-1/4” Quad
         Assist Brake  V-80 Parmac
         Drawworks Speed - Five (5) Forward – One (1) Reverse
2. Sand Drum
          42” x 10”  Brake Flanges
          Brake Area 2400 Sq. In.
          Barrel Dia.  14-5/8”
          Barrel Length  41-5/16”
          Drum Capacity with 9/16” Line – 15,540’
          Drum Clutch 30” Hopper
3. Two (2) Hopper Right Angle Drives
4. All Chains – Oil Immersion
5. Secondary Cooling System for Hydromatic – Consisting of   Hydraulically Operated Charge Pump and Air to Fluid high
   Heat transfer Assembly
6. Two Position Operators Console Primary at Deck Level and Secondary At Substructure Level.  Console Includes Clutch,
   Throttle, Rotary Drive, Transmission Shifters, Start, Kill, Hydraulic
   Pump, Air Slips, Hydraulic Pressure Regulator, Emergency
   Engine Warning Lights, Brake Water, And Winch Controls
7. 53 Gallon Hydraulic System Complete with Pump, Tank, Filters, Erection Controls, and Tong Circuit
8. Drum Type Dead Line Anchor mounted Directly to Frame
9. Drill Line Spool
10. Work Floor with Handrails and Static Free Fibergrate Flooring
11. Rotary Drive with Elevated Chain Case to Match Substructure

DERRICK

1. 112’ x 400,000# Capacity Hopper Telescoping Mast
2. Two (2) Single Acting Hydraulic Scoping Ramps
3. Two (2) Single Acting Three Stage Raising Cylinders
4. Racking Board 2 Position 54’ and 66’ Auto Deployment and Retraction
5. 4” x 5000 PSI Stand Pipe with Gooseneck
6. Ten (10) Line Crown
   1 -  1-1/8” x 30” Deadline Sheave
   4 -  1-1/8” x 30” Cross Mounted Reaving Sheavs
   1 -  1-1/8  x 30” Fast Line Sheave
   1 -  9/16”  x 24” Sand Line Sheave
7. Wind Guys and Load Guys Installed
8. Geronimo Escape Post
9. Fall Protection ………………………………………….. Price Each

SUBSTRUCTURE

1. Twelve (12) Foot Substructure
2. 17-1/2” Mechanical Rotary Table
3. Catwalk and V-Door Part of Wheel Mounted Assembly
4. 400,000# Setback Capacity
5. All Handrails and Stairways …………………….……. Price Each

TRIPLEX PUMPS – 600 HP

1. 600 Rated Brake HP 
2. 100,000# - Maximum Rod Load
3. 6” – Stroke Length
4. 2 – ¾” – 5” Plunger Diameter
5. 53- 7/16” Overall Length
6. 600 HP Series 60 Detroit Diesel
7. High Ambient Temperature Cooling System
8. Starter
9. Alternator
10. Allison 6061  6 Speed Automatic Transmission
11. PTO Driven Hydraulic System
12. 4” Charge Pump
13. 5” Valve High Pressure Manifold
14. 5000 PSI Mud Gauge
15. All Mounted on 3 Runner Oil Field Skid ………………… Price Each

POWER SWIVEL – MASTER SKID MOUNTED POWER SWIVEL UNIT

1. 2.5 Power Swivel
2. 85,000# Load Rated
3. Powered by 4.4 Liter Caterpillar Engine
4. Air Operated remote Controls
5. All Tanks, Electrical, and Operating Controls Included
6. Hydraulic Hoses From Power Unit to Swivel Unit Includ…Price Each    

This Rig will be Totally NEW, Built to the above Specifications.
Certain items could be altered based on Customer Requirements.